Table of Contents
Advertisement
General Information
Programming Timer via Control Panel
The digital timer allows the user to create up to 50 ON/
OFF programs. Each program schedules a time and day
of week the unit will automatically turn either ON or OFF.
See
Figure 2-7
for digital timer controls and display
features.
M
A
B
C
D
E
N
Figure 2-7. Digital Timer Controls and Features
A
Settings menu
B
Days of the week
C
Holiday program
D
Permanent manual override activated - channel A
E
Channel A functions
F
Day - seconds/minutes
I
Time, day, month, hours, minutes
J
Time switch without power supply
Low battery with power supply
K
Cancel
L
Program number
M Program
N
Joystick
14
Setting the Clock
L
K
J
I
Programming the Timer
F
009894
1. See
Figure
2-7. Press joystick (N) to enter Settings
menu (A).
2. Press and hold the joystick for 3 seconds to enter
clock settings.
3. Adjust the following settings to the current day and
time by moving joystick up and down to scroll
through values on a page. Move the joystick to the
right to advance to the next page.
•
Year
•
Day
•
Month
•
Hour
•
Minute
•
Daylight savings ON/OFF
4. Move joystick right to advance to PIN OFF.
5. Move joystick right to advance to END.
6. Press joystick to exit settings menu.
1. See
Figure
2-7. Press joystick (N) to advance to
Settings (A).
2. Press joystick to advance to Program menu (M).
3. Move joystick up to select NP to create a new pro-
gram and press joystick to confirm.
4. Move joystick left to select Timer ON/OFF and
press joystick to confirm.
5. Set timer to desired ON or OFF time by moving the
joystick up and down to scroll through times 00:01
through 23:59.
6. Press joystick to commit time setting and to
advance to day setting.
7. Move joystick left and right to set the program day
(B) then move the joystick up or down to schedule
the program as an ON or OFF event.
•
Days of the week are numbered 1-7 with the
week starting on Monday.
•
Selecting ON will turn the unit ON at the
programmed time.
•
Selecting OFF will turn the unit OFF at the
programmed time.
8. Press joystick for 3 seconds to save the program.
Owner's Manual for CTF10 Light Tower
Advertisement
Table of Contents
