Tailwheel Installation - RHINO RB60/72 Operator's Manual

TAILWHEEL INSTALLATION

1. Align Tail Wheel Beam Weldment (1) between pivot brackets located behind gearbox mount on the
Mainframe Weldment.
Note: Long side of caster fork pivot tube is positioned up.
2. Attach the Tail Wheel Beam Weldment (1) to the Mainframe Weldment with one Bolt (2), and Nut (3). Slide
Tail Wheel Beam Weldment (1) into Gauge Wheel Mount and retain with two Bolts, (4) Flatwasher (5), and
Nuts (6).
3. Insert the Tail Wheel Assembly into the Tail Wheel Beam (1) and retain with Flatwasher (8), and Cotter Pin
(8).
4. Tighten all Bolts to the proper torque.
RB60/72 02/11
© 2011 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-4