Honda CBR1000RA Manual page 198

20180713160204_32MKF6100_eng_BOOK Page 198 Friday, July 13 2018 16:21:28 JST
Make sure that the lug on the brake
2.
caliper bracket is positioned in the slot on
the swingarm.
Swingarm
Adjust the drive chain.
3.
Install and tighten the rear axle nut.
4.
Torque: 135 N·m (13.8 kgf·m, 100 lbf·ft).
Brake caliper
After installing the wheel, apply the brake
5.
bracket
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
Slot
the brake drags or if the wheel does not
rotate freely.
Lug
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tyre Puncture Removing Wheels
u
P. 158
2
195