Honda CBR1000RA Manual page 137

20180713160204_32MKF6100_eng_BOOK Page 137 Friday, July 13 2018 16:21:28 JST
Maintenance Fundamentals
If the chain does not move smoothly, makes
strange noises, has damaged rollers, has loose
pins, has missing O-rings, or kinks, have the
chain inspected by your dealer.
Also inspect the drive sprocket and driven
sprocket. If either has worn or damaged teeth,
have the sprocket replaced by your dealer.
Normal Worn
(GOOD) (REPLACE)
NOTICE
Use of a new chain with worn sprockets will cause
rapid chain wear.
134
#
Cleaning and Lubricating
After inspecting the slack, clean the chain and
sprockets while rotating the rear wheel. Use a dry
cloth with chain cleaner designed specifically for
O-ring chains, or neutral detergent. Use a soft
brush if the chain is dirty.
After cleaning, wipe dry and lubricate with the
recommended lubricant.
Recommended lubricant:
Drive chain lubricant designed
specifically for O-ring chains
If not available, use SAE 80 or 90 gear oil.
Damaged
(REPLACE)