Honda CBR1000RA Manual page 135

20180713160204_32MKF6100_eng_BOOK Page 135 Friday, July 13 2018 16:21:28 JST
Maintenance Fundamentals
Fuses
Fuses protect the electrical circuits on your
motorcycle. If something electrical on your
motorcycle stops working, check for and
replace any blown fuses.
# Inspecting and Replacing Fuses
Turn the ignition switch to the
to remove and inspect fuses. If a fuse is blown,
replace with a fuse of the same rating. For fuse
ratings, see "Specifications."
Blown fuse
NOTICE
Replacing a fuse with one that has a higher
rating greatly increases the chance of damage to
the electrical system.
132
P. 200
2
(Off) position
P. 220
2
If a fuse fails repeatedly, you likely have an
electrical fault. Have your motorcycle inspected
by your dealer.
Engine Oil
Engine oil consumption varies and oil quality
deteriorates according to riding conditions and
time elapsed.
Check the engine oil level regularly, and add the
recommended engine oil if necessary. Dirty oil or
old oil should be changed as soon as possible.
#
Selecting the Engine Oil
For recommended engine oil, see
"Specifications." P. 219
2
If you use non-Honda engine oil, check the
label to make sure that the oil satisfies all of the
following standards:
JASO T 903 standard : MA
*1
●
SAE standard : 10W-30
*2
●
API classification : SG or higher
*3
●