Recording The Outgoing Message; Accessing The Answering System - Uniden D1685 User Manual

To... Follow these steps from the base or a handset:
1. Open the menu with the phone in standby. Select
2. Press
Record a
personal
3. Press
greeting
4. To keep the greeting, press
1. Open the menu with the phone in standby. Select
Switch
between
2. The system plays back the current greeting. Press
greetings
Delete your Switch to your personal greeting; press
greeting InTErcoM/clEar

Accessing the Answering System

With the phone in standby,
you can access the system
from the base or remotely
from any handset:
♦ Only 1 station can access
the system at a time.
♦ During remote access:
– If you do nothing for
30 seconds, the phone
returns to standby.
– The phone beeps so you
know it's waiting for the next command.
– You can press the number key shown next to each command instead of
scrolling through the screens.
Getting Your Messages
To...
play new
messages
restart this
message
English - 16
then select Record
MEnu/sElEcT to start recording. Wait until the system says
"Record greeting" before speaking.
MEnu/sElEcT
to stop recording. The system plays back your
new greeting.
on the handset. To re-record it, press
then Greeting Options.
switch greetings.
on the handset while the greeting is playing.
Use
previous option:
From the base
Press PlaY/sToP.
The system announces the number of new & old messages,
then plays each new message (followed by the day and time if
set) in the order it was received.
Wait 5 seconds after the message begins, then
press PhonEbook.
Greeting.
PlaY/sToP
Press
remote operation mode.
to
PHONEBOOK
5:Stop
go back to the
[ / /select]
4:Delete
3:Skip
2:Play
Ans. Setup,
on the base or press
MEnu/sElEcT .
Ans. Setup,
MEnu/sElEcT
dElETE
on the base or
to start
MESSAGE/MUTE
Use to go to
CID
the next option:
1:Repeat
Press MENU/SELECT
to choose the
current option
END to exit remote
operation mode.
From a handset
Press MEssagE/MuTE
select 1:Repeat.
End
to
OR
.