Table of Contents
Advertisement
reset it: With the phone in standby, open the menu and select
select
VMWI
Reset, then select
USING THE ANSWERING SYSTEM
Answering System Options
You can set or change the answering system options from any station. Just open
the menu and select
Menu Option
Security Code
Ring Time
Record Time
Message Alert
Ans. Language
Call Screen
Ans. On/Off
Record Greeting
Greeting
Options
Recording the Outgoing Message
Your personal outgoing message or greeting can be from 2 to 30 seconds long.
If you don't record a greeting, the system uses the pre-recorded greeting: Hello,
no one is available to take your call. Please leave a message after the tone.
Yes.
Ans.
Setup. Select one of the menu options:
What it does
Enter a 2-digit PIN so you can access your answering system
from any touch-tone phone (see page 18).
Set the number of rings (2, 4, or 6) before the system answers.
If you call in remotely to check your messages,
the system answer after 2 rings if you have new messages or
after 4 rings if not.
Set the amount of time
message. Choose
Announce Only
to let callers leave a message.
Have the base beep every 15 seconds when you have a new
message. The alert stops after you listen to all your new
messages or if you press any base key.
Change the language of the system's voice prompts.
Turn on the Call Screen feature (see page 17).
Turn your answering system on or off.
You can also press
Record an outgoing message or greeting (see page 16).
Switch greetings or delete your greeting (see below).
(Ans.
Setup)
(1
or
4
minutes) callers have to leave a
if you don't want the system
ans on/oFF
on the base.
Global
Setup;
Toll Saver
makes
English - 15
Hide quick links:
Advertisement
Table of Contents
