7.1. Configuration example of the rover
Click the radio button of "Rover" to show the setting page as below picture.
7. Click the selection "Position Mode". There are three options. The option "kinematic" is
for RTK position. The option "Moving baseline" is for RTK heading. The option
"kinematic + moving baseline" is for simultaneous RTK position and RTK heading.
8. Click the selection of "Update Frequency" to set the update rate of RTK.
9. Input the settings of NTRIP Caster.
10. Click the button "Apply" to take effect. The settings will be saved in the internal flash
memory.
11. Check 4G/LTE connection by clicking "Network" button. If the product registers to the
network of the telecom provider, it will show "Connected" as below picture.
RTK-M100 User's Manual
Page 9of14
Need help?
Do you have a question about the RTK-M100 and is the answer not in the manual?