Gazer MMR71 Series User Manual page 13

Note:
Car Rearview Mirror with built-in MVR Gazer has the minimal
system voltage control function. As soon as the specified level 11,7V is
reached, the MVR shuts down and the parking mode will not be active.
This makes it possible to prevent the vehicle's battery from discharging
to a critical level after which it will be impossible to start the car engine.
9. Intelligent LDWS+FCWS systems. (for MMR51xx/MMR71xx/
MUR5100/MUR7100 models). The mirror features intelligent LDWS
(Lane Departure Warning System) and FCWS (Forward Collision
Warning System) systems. LDWS system is designed to alert the
driver about the departure from a chosen lane. FCWS will promptly
inform you about the decreasing safe distance between your car and
another vehicle thus helping avoid a possible accident or collision.
To operate correctly, LDWS and FCWS are to be calibrated with regard
to your car dimensions. To perform the calibration, first stop the
recording by pressing SEL/REC and then press MENU to access the
settings menu. Press UP/DOWN to navigate to «LDWS calibration»
and proceed with calibration.
10. GPS. The device has a built-in GPS receiver, which allows logging
GPS coordinates and speed during the trip. To enable this function,
first stop the recording by pressing SEL/REC and then press MENU to
access the settings menu. Press UP/DOWN to navigate to the «GPS»
item and then enable or disable this function.
Note: To watch video, route, fixed speed on PC, use Gazer
Player program. It is available for download on the web site
www.gazer.com
11. Memory card formatting. To format the memory card, stop the
recording by pressing the SEL/REC button and then press the MENU
button to access the video settings menu. After that, press the MENU
button again to go to the main settings. Use the UP/DOWN buttons
to navigate to "SD card formatting". Then press SEL/REC and set
the parameter to "ON". Once this is done, press the MODE button to
confirm the memory card formatting command.
Usage
ENG
13