Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Sic Marking i124s
- Page 1 USER MANUAL www.sic-marking.com NOTI124SUS-R01.docx 1/19...
-
Page 3: Table Of Contents
TABLE OF CONTENTS I - INTRODUCTION II - PRESENTATION 1/ Functioning principles 2/ Description III – INSTALLATION 1/ Unpacking 2/ Installation IV – USE of the machine 1/ Safety 2/ Positioning and clamping of the parts 3/ Adjustment of the machine 4/ Material and part shape V - INTRODUCTION VI –... -
Page 4: I - Introduction
I - INTRODUCTION Thank you for choosing a SIC MARKING machine for your marking applications. SIC marking systems contribute to improve industrial marking standards and we welcome you as a user of our systems. This guide contains the installation and use instructions for the “Integrated” type machines. -
Page 5: 2/ Installation
2/ INSTALLATION a) Fixing The marking system must be installed on a perfectly rigid and stable appropriate support frame. b) Connections Figure 1 : Rear of e10 Rear of E10 controller N° TITLE CONNECT TO : CODE ARTICLE MARKER MARKING MACHINE INPUT/OUTPUT/MARKING FILE START/STOP... -
Page 6: Use Of The Machine
CONF OPT RESERVED POWER SUPPLY Please be sure that the power supply is grounded. Connect to the controller the different elements by plugging in the connectors at the rear face of the controller. The PC will not be used for most application so you don’t need to connect it if the machine is running in stand alone mode. -
Page 7: 2/ Positioning And Clamping Of The Parts
2/ POSITIONING AND CLAMPING OF THE PARTS The part is submitted to high forces, it is necessary to immobilize it or to fix it in order to reach a good alignment of the characters during the marking process and a regular marking depth. -
Page 8: Introduction
V - MAINTENANCE The marking machine is a scratching marking system. It was developed and manufactured especially to meet the needs of our clients who want a machine which is: Sturdy and robust, Reliable, Ergonomic. It needs very little maintenance and if you observe the preventive maintenance recommendations, you will increase the life-expectancy of your machine. - Page 9 WARNING: The periodicity of lubrication of the piston seal and the stylus depends on the conditions of use of the machine, in particular the material to be marked, the nature of the compressed air and the rate of NOTI124SUS-R01.docx Translation of the original instructions 9/19...
-
Page 10: Spare Parts
This kit is available from our local sales representation and we invite you first to contact your distributor. If you do not know our local distributor, please contact us: SIC MARKING ZAC Bel-Air 195, rue des Vergers CS 80017... -
Page 11: Troubleshooting
IX - TROUBLESHOOTING WARNING: BEFORE ANY MAINTENANCE OPERATION, SWITCH THE CONTROLLER OFF AND REMOVE THE POWER SUPPLY 1ST CASE: THE HEAD DOES NOT START 1) Is the controller on? Check that the power supply cable is plugged. 2) Is the head connected to the controller? Check that the marking head cord is correctly connected to the controller. - Page 12 3Rd CASE: THE MARKING HEAD DOES NOT GO BACK HOME (ORIGIN)? 1) Is the sensor out of order? Change the sensor. 2) Is the belt broken? Change the belt. 3) Is the engine out of order? Change the engine 4) You have checked everything and it still does not work? Call our After Sales Service.
-
Page 13: Annex
PART III ANNEX NOTI124SUS-R01.docx Translation of the original instructions 13/19... - Page 14 NOTI124SUS-R01.docx Translation of the original instructions 14/19...
- Page 15 NOTI124SUS-R01.docx Translation of the original instructions 15/19...
- Page 16 NOTI124SUS-R01.docx Translation of the original instructions 16/19...
- Page 17 NOTI124SUS-R01.docx Translation of the original instructions 17/19...
- Page 18 NOTI124SUS-R01.docx Translation of the original instructions 18/19...
- Page 19 SIC MARKING Headquarters SIC MARKING KOREA ZAC Bel Air Banpo Technopia RM#707 186. 195 rue des Vergers Galmachi-ro /Gyeonggi-do 69480 POMMIERS Korea France +82 31 731 8400 Ph.: + 33 472 548 000 info@sic-marking.co.kr info@sic-marking.com .sic-marking.kr SIC MARKING USA SIC MARKING ITALIA...
Need help?
Do you have a question about the i124s and is the answer not in the manual?
Questions and answers