Uniden 2315+2 Quick Start Manual page 25

UP409ZH (WDECT2315-2) OM 12/22/05
System Reset
De-register the Handset
1) Enter the System Reset menu, and then the Deregister
HS submenu (see "Entering the Menu" on page 13).
2) Press /vol/ or
ID to be de-registered from the list, and then press
.
3) Press /vol/ or
4) Press . You will hear a confirmation tone.
When de-registration is complete,
appears.
5) After de-registering the handset, move to "Replacing the
Base Setting" below.
Replacing the Base Setting
1) Enter the System Reset menu, and then the Replacing
Base submenu (see "Entering the Menu" on page 13).
appears.
2) Press /vol/ or
3) Press . You will hear a confirmation tone.
The base information will be deleted.
When replacing the base is complete,
appears, register the handset to the new base (see page 44).
3:27 PM Page 19
/vol/ to select the handset
appears.
/vol/ to select .
/vol/ to select .
Make sure to perform
the Replacing Base
after de-register
the handset.
[ 19 ]