Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt D21805 Manual

The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare one tool
with another. It may be used for a preliminary
assessment of exposure.
WARNING:
● The declared vibration emission level
represents the main applications of the
tool. However, if the tool is used for
different applications, with different
accessories or poorly maintained, the
vibration emission may differ. This may
signifi cantly increase the exposure level
over the total working period.
● An estimation of the level of exposure
to vibration should also take into
account the times when the tool is
switched off or when it is running but
not actually doing the job. This may
signifi cantly reduce the exposure level
over the total working period.
● Identify additional safety measures to
protect the operator from the effects of
vibration, such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Defi nitions: Safety guidelines
The defi nitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety
alert symbol indicates a potentially
hazardous situation which, if not
avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fi re.
EC-Declaration of conformity
D21805/D21810/D21815
D WALT declares that these power tools have
E
been designed in compliance with: 98/37/EC (until
28 December 2009), 2006/42/EC (from 29
December 2009), 2004/108/EC, EN 55014-1,
EN 55014-2, EN 61000-3-2 & EN 61000-3-3,
EN 60745-1, EN 60745-2-1.
For more information, please contact D
the address below, or refer to the back of the
manual.
The undersigned is responsible for compilation of
the technical fi le and makes this declaration on
behalf of D WALT.
E
Horst Großmann
Vice President Engineering and Product
Development
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
17.12.2008
E N G L I S H
WALT at
E
23