E N G L I S H ROTARY DRILL D21101 Congratulations! You have chosen a D WALT Power Tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional Power Tool users.
Check for misalignment and seizure of moving parts, breakage of parts and any other conditions that may affect its operation. Have damaged guards or other defective parts repaired or replaced as instructed. Do not use the tool if the switch is defective. Have the switch replaced by an authorized D 5 Have your tool repaired by an authorized WALT repair agent...
E N G L I S H Electrical safety Inserting and removing a bit (fig. A) The electric motor has been designed for one Keyed chuck voltage only. Always check that the power supply • Open the chuck by turning the sleeve (6) corresponds to the voltage on the rating plate.
E N G L I S H Switching on and off (fig. A) • To run the tool, press the variable speed switch (1). The pressure exerted on the variable speed switch determines the tool speed. • If necessary, press the lock-on button (2) for continuous operation and release the switch.