1000 Mbps Uplink Port Status Led; Technical Specifications - H3C S3100 Series Installation Manual

Installation Manual (For Soliton)
H3C S3100 Series Ethernet Switches

1.3.3 1000 Mbps Uplink Port Status LED

Table 1-4 Description of 1000 Mbps uplink port status LED on S3100 series
LED
1000 Mbps uplink
port link LED
1000 Mbps uplink
port active LED

1.4 Technical Specifications

Table 1-5 Technical specifications for S3100 Series Ethernet switches
Model
Physical
dimensions (H x
W x D)
Weight
Number of fixed
ports
Number of
management
port
Power system
PoE (as
powered
device)
Mark on
Status
the panel
ON
LINK
OFF
BLINKING
ACT
OFF
S3100-26TP-EI-W
43.6 x 440 x 260
mm (1.7 x 17.2 x
10.2 in)
<3.5 kg (7.7 lb)
24 x auto-sensing
10/100BASE-TX
Ethernet port
2 x 1000 Mbps
Combo port
1 x console port
S3100-16TP-EI-W/S3100-8TP-EI-W Ethernet switches support
only AC input. S3100-26TP-EI-W AC-powered switches support
AC input and RPS DC input.
AC input:
Rated voltage range: 100 VAC to 240 VAC, 50/60 Hz
Maximum voltage range: 90 VAC to 264 VAC, 47 Hz to 63Hz
RPS DC input:
Rated voltage range: 10.8 VDC to 13.2 VDC
Not supported
1-8
Chapter 1 Product Introduction
Description
The port is connected properly.
The port is not connected or is
incorrectly connected.
The port is in the active state and
there is traffic on the port.
The port is in the active state but
there is no traffic on the port.
S3100-16TP-EI-W
43.6 x 300 x 220
mm (1.7 x 11.8 x
8.7 in)
<2.5 kg (5.5 lb)
16 x auto-sensing
10/100BASE-TX
Ethernet port
2 x 1000 Mbps
Combo port
Not supported
S3100-8TP-EI-W
43.6 x 230 x 200
mm (1.7 x 9.1 x 7.9
in)
<1.8 kg (4 lb)
8 x auto-sensing
10/100BASE-TX
Ethernet port
1 x 1000 Mbps
Combo port
Not supported