Dannmar B-200 Installation & User Manual page 19

Picture F14.1: Position of the weights in the various Program Types along the section of the rim
Angular position of the balancing weights in the several Program Type is shown in table T14.2.
Table T14.2: Angular position of the balancing weights in the various Program Types
Machine data
acquisition
system
Internal
plane
Semi-automatic
H12
Automatic
H12
Laser H12
Note (1): if the data acquisition system is disabled, the angular position of the weight will be in the 6 o'clock position.
In table T15.2 the symbol "H12" indicates that the angular position of the weight is at 12 o'clock while the symbol "H6" indicates
that the angular position of the weight is at 6 o'clock.
The machine data acquisition systems are defined as follows:

Semi-automatic when the Distance and Diameter data are automatically acquired with the Distance/Diameter sensor
while the data on the width must be manually entered;

Automatic when all data of the rim is automatically acquired with the two sensors.
STD,
ALU1,2,3,4,5
External Static
plane plane
H12 H12
H12 H12
H12 H12
Program Type
ALS1
Internal External
plane plane
Sensor-
rim
H12
contact
(1)
point
Sensor-
rim
H12
contact
(1)
point
H6
H12
Sticker
Static Internal External
plane plane plane
Sensor- Sensor-
rim
H6
contact contact
(1)
point point
Sensor- Sensor-
rim
H6
contact contact
(1)
point point
H6
H6
Sticker Sticker
ALS2
Static
plane
rim
H6
(1)
rim
H6
(1)
H6
H6
Page 17