IBM A10 Series Appliance Manual page 53

Figure 39. Installing a riser card
c. Press the card all the way into the slot. Make sure that the gold fingers are fully engaged.
d. Align the riser bracket with the rear chassis and press it down until it is secured to the chassis as
shown in the following figure.
Figure 40. Installing a riser card to the chassis
e. 5. Re-connect necessary cables to the ports of the card.
Replacing the CMOS Battery
If the server no longer automatically displays the correct date and time, you many need to replace the
battery that provides power to the real-time clock.
CAUTION: The battery contains lithium. To avoid possible explosion, do not burn or charge the
battery. A risk of fire exists if the battery is not properly handled or discarded properly.
To reduce the risk of personal injury: do not expose the battery to temperatures higher than 60°C
(140°F) and do not dissemble, crush, puncture, short external contacts, or dispose of in fire or
water.
Chapter 6. Maintain the appliance 33