2-6-1. Selecting the BU_FLASH
[To BU_FLASH of VPC]
a. Press the "2/5" key on the remote commander to select 001 DATA_BAKUP.
b. Press the "1/4" key on the remote commander to select 000 BU_FLASH.
c. Press the "3/6" key on the remote commander to select from 0 to 1. Data transfer will be done in few seconds.
a
c
b
Remote Commander
Service Procedure for Panel, Board and Software Change / Upgrade(WW)
Press 2: increment
Press 3: increment
Press 5: decrement
Press 6: decrement
VPC SERVICE
001 DATA_BAKUP
000 BU_FLASH 0
Press 1: increment
Press 4: decrement
VPC Service menu
This procedure is to copy W/B adjustment data in BA* board to T-con board on Panel.
Note: This procedure is necessary for KDL-**HX85* only.
VPC SERVICE
001 DATA_BAKUP
NG
000 BU_FLASH 2
DATA TRANSFER NG
VPC SERVICE
OK
001 DATA_BAKUP
000 BU_FLASH 3
DATA TRANSFER SUCCESS
SERVICE PANEL
34