Using Freeview Play - Sharp BL Series Operating Instructions Manual

DTV, Freeview & Freeview Play
Using Freeiew Play
Freeview Play enables you to watch live television as well as having access to catch up television services
and playback from the start of a live programme.
Notes: To use Freeview Play your set needs to be connected to the internet and tuned into a reliable
and consistent Freeview signal.
Freeview Play is only available in the United Kingdom.
To tune in your set, refer to the
Channel Guide
While using Freeview Play, the Electronic Programme Guide (EPG) is available while in the Live Television
mode. It provides information about forthcoming programmes. You can view the start and end time of all
programmes and on all channels for the next 7 days. To enter the EPG, press the [GUIDE] button on your
remote control. Press the [EXIT] button to leave programme guide.
When the EPG is entered, a screen like the one below will appear. This will show a live preview of the
programme being received in the top left-hand corner and a synopsis this on the right. This synopsis will
change as you navigate around the guide with the [ARROW] buttons on the remote control.
In the middle of the display is the programme listing, which is shown in time order, half hour segments
being shown at the top and channel name on the left. If you would like to quickly scan through the
channels, press the [CH+] or [CH-] buttons to quickly move up or down through the listings. Using the
[RIGHT] button will move forward in time, using the [LEFT] button will move back in time.
70
Tuning in Digital Channels section.