Digital Television, Freeview & Freeview Play; Tuning In Digital Channels - Sharp BL Series Operating Instructions Manual

DTV, Freeview & Freeview Play
DIGITAL TELEVISION, FREEVIEW AND
FREEVIEW PLAY
To watch television programmes via Antenna, Cable or Satellite, press the [HOME] button, select
from the Home Page, and select Live television from the apps list. You can also enter the digital television
mode by pressing the [TV] button on the remote control.
Should your set not be tuned into a digital signal, follow the instructions as below:

Tuning in Digital Channels

It is possible to tune into terrestrial, cable and satellite digital television signals on your television set. To
do this, follow the instructions given below for each type of signal input.
Terrestrial
Before tuning terrestrial channels, ensure the television is in TV mode:
Press the [HOME] button, then select Settings > Channel > Channel installation mode.
1.
2. Select option Antenna.
To start automatic channel scan press the [HOME] button, then select Settings > Channel > Channels
3.
> Channel scan.
After tuning into Freeview, you may be presented with a choice of regions; this is dependent upon your
location and the number of transmissions received. Normally there will only be one transmitter:
• Region 1
• Region 2
• Region 3
Cable
Receiving cable digital broadcast;
1. Before tuning cable channels, ensure the television is in cable mode:
2. Press the [HOME] button, then select Settings > Channel > Channel installation mode.
3. Select option Cable.
To start automatic channel scan, press the [HOME] button, then select Settings > Channel > Channels
4.
> Channel scan.
Sattelite
Before tuning satellite channels, ensure the television is in satellite mode:
Press the [HOME] button, then select Settings > Channel > Channel installation mode.
1.
2. Select option Preferred Satellite if you want to tune one of satellites preferred in your country.
3. Select option General Satellite to get possibility to tune any satellite.
To start automatic channel scan, press the [HOME] button, then select Settings > Channel > Channels
4.
> Satellite Re-scan.
68
Country
Transmitter Location
Local News variation