Sharp BL Series Operating Instructions Manual page 23

Getting Started
Full First Time Installation
When the set is turned on for the fi rst time it will enter the installation mode as shown here. It is
recommended that all steps are completed as shown in the process to ensure correct operation. Use the
back button on your remote control to return to the previous screen.
1. When the set fi rst turns on, you will be
requested to select your preferred on-screen
display language. This will set the language
in which the menus and associated
information is displayed in. Should you wish
to do so, this can be changed later in the
Device Preferences menu.
2. Next you will be requested to set up your
set with an Android phone. If you do not
have an Android phone, proceed to the
next step.If chosen, the set will request you
to log into your Android phone and connect
the set to your network automatically.
3. If your set is not connected via an Ethernet
cable, it will request that a Wi-Fi network
is selected and logged into. Choose your
network and then follow the on-screen
display to enter your password. When
correctly entered, the set will log into your
network and connect to the internet if this
is available.
4. Now you can sign in using your Google
account. If you do not have a Google
account, this can be set up at this stage if
required. Should you not want to sign in or
create a Google account, then this stage can
be skipped.
5. If signing in, there are two options. You can
either sign in using a device by choosing
"Use your phone or computer", this will
bring up further options to follow. If using
the remote control to sign in, you will be
asked for your Google account name and
password; follow the prompts to sign in.
24