Intenso 7“ WEATHERMAN Manual page 47

Time
settings
Alarm
settings
Photo
Settings
Language menu
Light sensor settings
Factory settings
Hour
Minute
AM / PM
Alarm 1
Alarm 2
Alarm 3
Photos with weather
Slideshow
Duration of display
Transition effects
Choose the desired language.
On
Off
Reset the device to the factory settings.
Select the current hour.
Select the current minute.
Choose between AM and PM. (AM = 0-12; PM = 12-24)
Set time for Alarm 1.
Set time for Alarm 2.
Set time for Alarm 3.
Switches between current weather and photos on your connected memory
device while in photo mode or weather mode.
Only weather is displayed in weather mode. The slideshow only shows photos
and does not include the weather in photo mode.
Select the duration for each frame during the slide show.
Options: 3 sec, 5 sec, 15 sec, 1 min, 15 min, 1 hr.
Choose a transition effect for the slideshow. You can choose between the seven
transition effects in the list individually or select „random‟.
Light sensor is turned on (display adjusts to room brightness).
Light sensor is turned off.
EN - 17