Inserting The Batteries; Inserting The Battery In The Remote Control; Inserting The Batteries In The Outdoor Sensor - Intenso 7“ WEATHERMAN Manual

INSERTING THE BATTERIES

Inserting the battery in the remote control

Position the remote control with the buttons facing downwards.

Press the spring to the left of the battery compartment to the right and remove the battery

compartment.
Insert a CR2025 lithium battery in the battery compartment with the plus sign facing upwards.

Re-insert the battery compartment in the remote control.


Inserting the batteries in the outdoor sensor

 Loosen the screw to the battery compartment cover on the back of the outdoor sensor.
 Open the battery compartment.
 Insert 2 AAA batteries. Pay attention to polarity.
Replace the battery compartment cover.

Re-tighten the screw to the battery compartment.

Note: Please dispose of used batteries in the proper manner in accordance with the law.
EN - 5