How To Install - GOAL ZERO YETI LINK User Manual

Connect your Yeti Lithium to your vehicle's battery using an EC8 Female
4.
to Ring Cable and an EC8 12' Extension Cable. The ring cable connects
directly to your vehicle's 12V battery or alternator's +/- terminals and
the extension cable connects the ring cable to the back of your Link.
Goal Zero Goal Zero Yeti Lithium and
Solar Panels Goal Zero Yeti Link Expansion Module
(Sold Separately)
REQUIRED (sold separately)
WARNING: Never connect a power source to the Link before
installing into the Yeti. Always connect the Link to the Yeti before
connecting any power source.
6
Goal Zero Yeti Tank
Expansion Battery
+
(sold separately)

HOW TO INSTALL

Tools you'll need: Screwdriver
1. Turn off all the output ports and unplug the Yeti from any power
source.
2. Open the lid of the Yeti and remove the expansion module carriage
from the Yeti by removing the six screws and sliding out the
carriage.
a. Use both hands to work the expansion module carriage out of
its position.
WARNING: Do not exceed 22V input for the module. Doing so
can cause serious damage to the Yeti and potential bodily injury.
Take note of voltages when using third party solar panels with the
module. Do not chain solar panels in series (positive to negative,
positive to negative, etc.), as this can result in dangerously high
voltages.
7