Important Safety Instructions; Get To Know Your Gear - GOAL ZERO YETI LINK User Manual

IMPORTANT SAFETY INSTRUCTIONS

Please save these instructions
Read all the instructions and cautions before
beginning installation.
Do NOT disassemble or attempt to repair the module.
Do NOT allow water to enter the module, the Goal Zero Yeti
Lithium, or the Goal Zero Yeti Tank.
Make sure all connections are tight and secure before using.
Do NOT exceed 22V input for the module; this can cause
serious damage to the Yeti Lithium and potential bodily
injury. Check specs for third party solar panels and lead acid
batteries before attempting to use them with the module.
Do NOT chain third party solar panels or lead acid batteries
in series (connecting positive to negative, positive to
negative, etc.), as this can result in dangerously high levels
of voltage that can cause serious damage to the Yeti Lithium
and potential bodily injury.
Compatible with Yeti 1000, 1400 and Yeti 3000 Lithium
Power Stations
WARNING: Never connect a power source to the Yeti Link before
installing into the Yeti. Always connect the Link to the Yeti before
connecting any power source.
WARNING: Do not exceed 22V input for the Link. Doing so can cause
serious damage to the Yeti and potential bodily injury. Take note of
voltages when using third party solar panels or third party lead acid
batteries with the module. Do not chain solar panels or lead acid
batteries in series (positive to negative, positive to negative, etc.), as
this can result in dangerously high voltages.
2

GET TO KNOW YOUR GEAR

Front of Link Expansion Module
Input Charge Indicator
Data Transfer Connector
2
Master 8mm Input
for Yeti Link & Yeti Tank
Expansion Battery
Lead-Acid State of
Charge Indicator
Fan Vent
Blue Connector
3