Table of Contents
Advertisement
CONFERENCE
To conference a call:
1.
While on a call, press the "Conf" soft key or press the "Transfer"
soft key.
2.
Use the keypad to dial the telephone number of the party to be
joined to the conference.
3.
Press the "Dial" soft key to initiate the call, or wait a few
seconds for the call to be automatically dialed.
4.
If you decide not to complete the conference, then the call can
be terminated by pressing the "EndCall" soft key.
5.
If you want to switch between each party before the
conference is established, you can use the "Shuttle" soft key.
6.
You can complete the conference by pressing the "Conf" soft
key.
Hang Up while conferencing:
1.
If you are establishing a conference call and want to hang up
on the person you are calling, press the "EndCall" soft key
while the phone for the third party is still ringing; the other
two parties will be connected in a blind transfer call.
PAGING
To Page Phones in a Group:
•
Dial the Page Group extension number or select the Paging line
key (programmed previously via Control Panel.
To Answer a Page:
•
Dial *80 and you will be connected to the person that initiated
the Page
12
Hide quick links:
Advertisement
Table of Contents
