Connection To The Electric Network - Saeco IDEA RST Series Operation And Maintenance

English
• Connect the filter to the water network.
C Water filter
D Water Net
E Drain pipe
• Connect a drain pipe to the fitting and fix it with a
serrated clamp.
• Connect the machine to the drinking water network
through the fitting (using tube and fitting made of materials
suitable for food).
H Drain fitting
I Dispensing fitting
G electric power cord
F supporting feet
• Insert the drain and filling pipes into the proper hole (see
chapter "Unpacking and Positioning").
78
5.4 Connection to the Electric
Network
The
Technician,
charge of the appliance's
installation, shall make sure
that:
• the power supply system complies with the safety
instructions in force;
• the voltage corresponds to that indicated on the appliance
data plate.
In case of doubt, do not
proceed
installation and ask qualified
and authorised personnel
to accurately check the
system.
Also make sure that the
electrical
appliance is connected to
has the capacity to bear
the max load required, as
indicated on the data plate.
Maintenance
who is in
with the
system the