Download Print this page
Epson Perfection V370 Quick Start Manual

Epson Perfection V370 Quick Start Manual

Placing film or slides
Hide thumbs Also See for Perfection V370:

Advertisement

Quick Links

Placing Film or Slides (EPSON Perfection V370 Photo Only)
Removing the Document Mat
Placing Film in the Holder
Placing Slides in the Holder
Storing the Film Holder
Replacing the Document Mat
Removing the Document Mat
To scan film strips or slides, you need to remove the document mat from the scanner cover. This uncovers the
transparency unit window so your scanner can use it to scan your film or slides.
Open the scanner cover and gently slide up the document mat to remove it.
Use a soft cloth to wipe the transparency unit window and the document table before placing your film or
slides.
a. transparency unit window
To place film for scanning, see Placing Film in the Holder.

Advertisement

loading

Summary of Contents for Epson Perfection V370

  • Page 1 Placing Film or Slides (EPSON Perfection V370 Photo Only) Removing the Document Mat Placing Film in the Holder Placing Slides in the Holder Storing the Film Holder Replacing the Document Mat Removing the Document Mat To scan film strips or slides, you need to remove the document mat from the scanner cover. This uncovers the transparency unit window so your scanner can use it to scan your film or slides.
  • Page 2: Placing Film In The Holder

    To place slides for scanning, see Placing Slides in the Holder. To replace the document mat, see Replacing the Document Mat. Placing Film in the Holder Open the cover of the 35 mm film strip holder. Slide your film strip all the way into the film holder with the shiny base side facing down. Your images and any wording on the film strip should appear backwards on the side that faces up.
  • Page 3: Placing Slides In The Holder

    Make sure the film strip is placed as shown. Place the film holder on the document table so that it is aligned as shown. Make sure the tab with the film icon on the film holder fits into the area with the same icon on the scanner. Make sure you removed the document mat.
  • Page 4 You cannot scan negative slides with Full Auto Mode. Make sure the white stickers on the back of the film holder and the areas around them are not scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble recognizing your slides in Full Auto Mode.
  • Page 5: Storing The Film Holder

    When you are finished scanning slides, be sure to replace the document mat before scanning documents or photos. See Replacing the Document Mat. Storing the Film Holder When you are not using the film holder, you can store it inside the scanner cover. Open the scanner cover and remove the document mat.