Table of Contents
Advertisement
Explanation of the icons:
Edit basic parameters of the camera
PTZ Control
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you set the PTZ camera.
Before you start, please check that the PTZ and the NVR are connected properly through RS-485 interface.
PTZ Settings
Steps:
1.
Enter the PTZ Settings interface.
Menu >Camera> PTZ
2.
Choose the camera for PTZ setting next to Camera label.
3.
Enter the parameters of the PTZ camera.
Note:
All the parameters should be exactly the same as the PTZ camera parameters.
4.
Click Copy if you want to configure same settings to other PTZ cameras.
5.
Click the Apply button to save and exit the interface.
PTZ Control
In the Live View mode, you can press the PTZ Control button on the front panel or on the remote, or choose the
PTZ Control icon
Camera
S ettings
I nterface
to enter the PTZ toolbar.
Get the live view of the camera
Advertisement
Table of Contents
