Table of Contents
Advertisement
USB
Playing from USB
1.
Change to USB source
2.
Insert USB Thumb Drive into USB port on the front of the unit
3.
Use
and
on the unit or and on the remote to change songs
4.
Hold
and
5.
Use
and
on the remote to change folders
6.
Press
on the unit or on the remote to pause and resume playback
7.
Press PRESETS on the unit or on the remote to toggle between Repeat Track, Repeat Folder,
Repeat All, and Shuffle
PHONO
AUX
Recording to USB
The RR75 can record from PHONO, AUX, CD, and Bluetooth®. Files are saved in 128kbps quality. The USB
drive must be formatted in FAT32 or exFAT and be 32GB or less. If the USB is not compatible or not
recognized the display will show "Error".
Recording from PHONO/AUX/Bluetooth®
1.
Change to PHONO/AUX/Bluetooth® source
2.
Insert USB drive into USB Port on front of the unit
3.
Play music and press the RECORD button on the unit to begin recording. The Recording LED will be
flashing red when recording
4.
Press
on the unit or
recording without stopping recording
5.
Press
on the unit or on the remote to pause recording and press again to resume recording
6.
Press RECORD to stop recording
Note: Files will be saved in the following location on the USB drive: /RECORD/LINE_IN
Recording from CD
When recording from CD the RR75 will lock playback control until recording is finished. Recording can
be stopped at anytime but cannot be paused or tracks changed during recording.
1.
Change to CD source
2.
Insert USB drive into USB Port on front of the unit
3.
Press RECORD on the unit to begin recording
4.
Use
and
on the unit or and on the remote to select RECORD ONE, RECORD FOLDER,
RECORD ALL
5.
Press RECORD to start recording. The Recording LED will be flashing red when recording
6.
Press RECORD to stop recording
Note: Files will be saved in one of the following locations on the USB drive: /RECORD/COPY
or and to rewind/fast forward
CD
on the remote to split the track. This can be used to split songs during
BT
/RECORD/CDIN
9
Advertisement
Table of Contents
