Operation; Radio Operation; Listening To The Radio; Playing A Cd - Electrohome EA1409 User Manual

LISTENING TO THE RADIO

1. Rotate the OFF/VOLUME control clockwise until a click is heard to turn the
unit on. The LED power indicator will light.
2. Rotate the AM/FM/PH/CD switch to the AM or FM position as desired.
The backlight behind the AM/FM dial will light.
3. Rotate the tuning control to select a station. If tuned to a strong FM
station, the FM Stereo indicator will light and the sound will be in stereo.
4. Rotate the OFF/VOLUME control to set the volume as desired. Rotate
the OFF/VOLUME control counterclockwise until a click is heard to turn
the unit off.
AM Note:
The AM antenna is inside the cabinet. If reception is unsatisfactory try
repositioning the cabinet slightly for the strongest signal.
FM Note:
The wire antenna is located on the back cabinet. If necessary adjust the
position and direction of this antenna for the best reception.
INSERTING AND PLAYING A CD
1. Rotate the OFF/VOLUME control clockwise until a click is heard to turn
the unit on. The LED power indicator will light.
2. Rotate the AM/FM/PH/CD switch to the CD position. '- -' will appear in
the display.
3. Press the OPEN/CLOSE button to open the CD tray. Place a CD in the
tray, with the printed label facing up. Press the OPEN/CLOSE button
again to close the CD tray.
4. The disc will spin for a few seconds while the player is reading the disc
and the total track number will appear in the display. Press the PLAY/
PAUSE button to start playing the first track of the disc. Adjust the OFF/
VOLUME control to set the volume as desired.
5. To skip forward or backward through the tracks on the disc, press the
SKIP REV or SKIP FWD buttons. To search forward or backward through
the tracks, press and hold the SKIP REV or SKIP FWD button.
6. Press the PLAY/PAUSE button to pause playback. The PLAY/PAUSE
indicator will blink in the display. Press again to resume playback. When
the disc is through playing, it will stop rotating.
7. To stop playback entirely, press the STOP button.
Note:
• As each track is played, the track number is shown in the display.
• The PLAY/PAUSE indicator will appear in the display during CD playing.

OPERATION

- 9 -