Assembly - Optimum 400 EVOLVE User Manual

5
// O P T I M U M 4 0 0 E V O L V E
A S S E M B LY
Please wash the parts before assembling the juicer.
1 .
Confirm that the silicone tab on the bottom of
the bowl is firmly inserted.
(Missing this step could cause the juice to leak
or a decreased juice yield).
When cleaning, pull out the juicing rubber tab,
and put back before using the juicer again.
3 .
Place the strainer in the bowl in the direction
of the arrow.
2 .
Install the bowl onto the main body, by aligning
it to match the two locking points.
4 .
Install the auger into the middle of the strainer,
then rotate to insert properly.