Troubleshooting; Product Specifications - Optimum 400 EVOLVE User Manual

10
// O P T I M U M 4 0 0 E V O L V E
T R O U B L E S H O O T I N G
P R O B L E M P O S S I B L E C A U S E
The appliance is not plugged
in.
It's not working!
You have not pressed the
power button.
It is normal for the juicing
screw, juice strainer, feeding
The juicer has
chute, juice cup and other
discoloured
parts of the appliance
parts.
to be stained by certain
ingredients.
The appliance is equipped
with an intelligent protection
chip, which automatically
switches o the appliance
The juicer
after 20 minutes of juicing.
has stopped
working.
The appliance is overloaded
or blocked.
P R O D U C T S P E C I F I C A T I O N S
1 Product
2 Rated Voltage
3 Rated Power
4 Rated Frequency
The device complies with the European Directives 2014/35/EU, 2014/30/EU and 2009/125/EC
Australia Standard: AS/NZS 60335.2.14:2017
At the end of its service life, this product may not be disposed of in the normal household waste,
but rather must be disposed of at a collection point for recycling electrical and electronic devices.
The material are recyclable according to their labelling. You make an important contribution to
protecting our environment by reusing, recycling or utilizing old devices in other ways. Please ask
the municipal administration where the appropriate disposal facility is located.
S O L U T I O N
Ensure the 400 Evolve Cold Press Juicer is
plugged into a grounded power outlet.
Press the power button and the appropriate
arrow.
This discolouration does not compromise the
safety of using the appliance and does not
pose any harm to your health.
Wait 20-30 minutes for the motor to cool down
and start again.
Restart the appliance after hearing the 'beep'
sound. If the blockage still remains, unplug the
juicer and remove any food debris or pulp and
restart the appliance.
Optimum 400 Evolve Cold Press Juicer
220-240V
250W
50-60Hz