Installation Overview; Introduction; Installation Materials - Garmin GMA 350 Installation Manual

2

INSTALLATION OVERVIEW

2.1

Introduction

This section provides hardware equipment information for installing the GMA 350/350H Audio Panel,
related hardware and suggestions relating to the marker beacon antenna. Installation of the GMA
350/350H should follow the aircraft TC or STC requirements. Cabling is fabricated by the installing
agency to fit each particular aircraft. The guidance of FAA advisory circulars AC 43.13-1B and
AC 43.13-2B, where applicable, may be found useful for making retro-fit installations that comply with
FAA regulations.
2.2

Installation Materials

The GMA 350/350H is available as a single unit under the following part number:
GMA 350, Unit Only, (011-02385-00)
GMA 350, Standard, (011-02385-00)
GMA 350H, Unit Only, (011-02385-10)
GMA 350H, Standard, (011-02385-10)
*Includes GMA 35 Connector Kit (011-02302-00), GMA 350 Install Rack (115-01452-00), and
GMA 35 Backplate (011-02300-00).
2.2.1 Equipment Available
Each of the following accessories is provided separately for the GMA 350 unit.
Connector Kit, GMA 35
Backplate, GMA 35
Install Rack, GMA 350
2.2.2 Additional Equipment Required
Hardware #6-32 x 100° Flat Head SS Screw [(MS24693, AN507R or other approved
fastener) (6 ea.)] and #6-32 Self-Locking Nut [MS21042 or other approved fastener (6 ea.)].
Hardware required to mount the installation rack is not provided.
GMA 350/350H Installation Manual
190-01134-11
The document reference is online, please check the correspondence between the online documentation and the printed version.
Item
Item
Catalog Part Number
010-00871-00
010-00871-01*
010-00871-10
010-00871-11*
Garmin P/N
011-02302-00
011-02300-00
115-01452-00
Page 2-1
Rev. B