Advertisement
LED FOLDABLE LIGHT
Instructions for operation buttons on remote control:
Power ON/OFF Button
Brightness Shortcut Button
Brightness Increase Button
Brightness Decrease Button
Remote Address Setting Button
1. To pair the remote control and light: press and hold the Pairing Button for more than 5 seconds, until
buzzer sounds.
2. Turn on the light or lights you wish to pair with the remote control, and pair. Don't turn on those lights
you don't wish to pair.
3. The remote control and light unit packed in each box are factory paired. The remote control can be
paired to another light or multiple units by following the pairing instructions.
4. The remote control working distance is 20m.
7
R
Sound Button / Pairing Button
Color Temperature Shortcut Button
Color Temperature Increase Button
Color Temperature Decrease Button
LED FOLDABLE LIGHT
Operating instructions:
1. Set-up instructions:
(1) Align the four holes (A, B, C, D) on the back of metal mounting plate to the corresponding four posts
(A, B, C, D) on the fixing plate on the back of light. Push in and turn the metal mounting plate/ball head
bracket counterclockwise until you hear a "click." The metal mounting plate/ball head bracket is now
secured to the light body. To remove the metal mounting plate/ball head bracket, just pull out mounting
plate lock pin and rotate the metal mounting plate/ball head bracket clockwise.
D
A
B
C
(2) Loosen the stand mount locking screw by turning counterclockwise. Place the mount on the light stand and
secure the screw by turning clockwise. Please ensure the light stand stud is fully inserted into the mounting plate
and the screw is securely fastened.
A
D
B
C
Stand mount locking screw
8
Advertisement
