Advertisement
LED FOLDABLE LIGHT
5.Filters
Filter comparison table
Rosco
Description
FOTODIOX No.
0328
R3202
CTB
1228
R3203
3/4 CTB
1218
R3204
1/2 CTB
2218
R3206
1/3 CTB
2118
R3208
1/4 CTB
2108
R3216
1/8 CTB
0586
R3220
2X CTB
9101
R3407
CTO
9103
R3411
3/4 CTO
6106
R3408
1/2 CTO
3108
R3409
1/4 CTO
3109
R3410
1/8 CTO
9100
3420
2X CTO
9201
3441
CTS
9206
3442
1/2 CTS
3208
3443
1/4 CTS
4108
3444
1/8 CTS
6408
3304
GREEN
2208
3315
1/2 GREEN
2109
3316
1/4 GREEN
2106
3317
1/8 GREEN
4009
3308
MAGENTA
3008
3309
3/4 MAGENTA
4008
3313
1/2 MAGENTA
3118
3314
1/4 MAGENTA
2107
3318
1/8 MAGENTA
9102
3310
3310
21
Rosco
Description
FOTODIOX No.
9203
430
7
07 CYAN
2219
431
5
15 CYAN
2418
433
0
30 CYAN
0828
436
0
60 CYAN
0925
439
0
90 CYAN
2209
441
5
15 GREEN
6506
443
0
30 GREEN
9701
446
0
60 GREEN
9901
449
0
90 GREEN
4208
451
5
15 YELLOW
9304
453
0
30 YELLOW
9301
456
0
60 YELLOW
9300
459
0
90 YELLOW
3009
461
5
15 RED
9008
463
0
30 RED
9002
466
0
60 RED
9000
469
0
90 RED
3007
471
5
15 MAGENTA
7018
473
0
30 MAGENTA
9013
476
0
60 MAGENTA
9012
479
0
90 MAGENTA
3006
481
5
15 PINK
8008
483
0
30 PINK
9003
486
0
60 PINK
9001
4890
90 PINK
LED FOLDABLE LIGHT
6.Scenes
Use the selector knob to highlight the desired mode. Push the knob once to enter. Use the selector, saturation
and intensity knobs to adjust the parameters.
-----(CCT mode) CCT:2800-10000 K INT: 0-100%
GN: -1 / +1
*Mode TWO G+B, R+G+B, R+G, R+B
-----(HSI mode) HUE: 0-360゜, SAT: 0-100% INT: 0-100%
*Mode THREE
-----(RGBWT mode) Red: 0-100% Green: 0-100% Blu: 0-100% W:0-100% T: 0-100%
7.[Lang] (language)
Use the selector knob to highlight the desired language. Push the knob once to select.
*English
*Chinese
8.DMX settings
Adjust the DMX address using the selector knob, push the knob to select the address.
DMX Address: 001-512
9.RMT settings (remote control settings)
Remote control operating instructions:
1.On the light, go to menu and enter RMT settings. Set the desired wireless receiving address from 0-511.
2.On the remote control, go to menu and enter RMT settings. Set the desired wireless receiving address from 0-511.
3.Make sure the wireless receiving address on the light matches the light receiving address on the remote control.
The remote control can control multiple lights at the same time.
4.The wireless remote control has a working distance of approximately 65 feet (20 meters).
Note: After setting the wireless receiving address in the RMT settings on the light, you cannot change the address
through the remote control. You can only manually adjust it through the RMT settings on the light.
10.Factory reset
To restore the light or remote control to factory settings:
Press and hold the MENU button on the light or on the remote control for more than 4 seconds in the main menu
on the light, the entire device will reset, and the data will be restored to the factory setting state.
22
Advertisement
