TYAN S1668 User Manual page 23

Video
This category detects the type of graphics adapter used for the primary
display system. It must match your video display card and monitor. Al-
though secondary monitors are supported, you do not have to select that
type in setup.
EGA/VGA
CGA 40
CGA 80
Mono
Halt On
The category determines whether the computer will stop if an error is
detected during power up.
All errors
No errors
All, but Keyboard The system boot will not stop for a keyboard error;it
All, but Diskette
All, but Disk/Key
Memory
The category is for display-only and it is determined by POST Power On
Self Test of the BIOS.
Base Memory
Extended Memory
S1668-ATX-001 http://www.tyan.com
Enhanced Graphics Adapter/Video Graphics Array.
For VGA,SVGA, or PGA monitor adapters.
Color Graphics Adapter, power up in 40 column mode.
Color Graphics Adapter, power up in 80 column mode.
Monochrome adapter, includes hi-res monochrome.
Whenever the BIOS has detected a non-fatal error, the
system will be stopped and you will be promted.
The system boot will not be stopped for any errors that
are detected.
will stop for all other errors.
The system boot will not stop for disk errors; it will
stop for all other errors.
The system boot will not stop for a keyboard or disk
error; it will stop for all other errors.
The POST of the BIOS will determine the amount of
base (or conventional) memory installed in the system.
The value of the base memory is typically 640K.
The BIOS determines how much extended memory is
present during the POST. This is the amount of
memory located above 1MB in the CPU's memory
address map.
23