Panasonic KX-TGP600 Manual page 5

Nr. Description
Select "Add new target" on the administration
portal in the tab Targets.
1.
Find more information in the
administration portal manual.
A new window appears. Insert the name,
the extension and/or the trunk.
Select then your mobile handset from
2.
the device list: device is
[MAC address of the base station] -
[IPEI of the mobile handset]
For all other settings, see the
3.
administration portal manual.
4. Save your entries.
Registering mobile handset to the DECT base station
The KX-TPA60 mobile handset is already registered at the telephone system when you
receive it. In case you use the KX-TPA60, you will not need to carry out the following
steps.
Press and hold the key
slowly. THen press the "OK" key on the mobile handset.
The mobile handset now scans for the DECT base station.
Following you need to register the mobile handset to the base station. You can do it directly over the
menu of your Panasonic mobile handset.
1. You will see this on the display: "Register Unit". Press OK.
Now press (and hold) the OK button for approx. 5 seconds.
2.
3. The mobile handset registers automatically.
4. After registration you will see following information on the display: Time and Targets,
"extension:name"
Picture
on the base station for approx. 4 seconds until the LED starts to blink
5