Scan Barcodes; Accept Nfc Payments - Infinite Peripherals Infinea mPOS Plus User Manual

User Manual — Infinea mPOS Plus

Scan Barcodes

Scanning barcodes may vary based on the application
on your iOS device. Verify the correct procedure
with the Third-Party application provider before
performing this procedure.
1. To scan a barcode, point the scanner end of the mPOS toward
the barcode.
2. Press the Scan button until the data is read.

Accept NFC Payments

The Infinea mPOS built-in tag/card reader allows you
to accept near-field communication (NFC) payments.
1. Place a NFC tag/card over the transmitter/receiver NFC label
on the front of the unit.
2. Tap the reading NFC card button on the application. Data is
sent from the unit to the iOS device.
3. Do not remove the card/tag from the transmitter until the
transaction is complete as removing the card too quickly may
void the transaction.
Note:
For definitions of the NFC LED indicators, refer to the status
indicators table.
17