Roper Rhodes Minerva Toilet Seat Fitting Instructions & Product Care

Toilet Seat Fitting Instructions & Product Care
Please read carefully before attempting to fit the seat. If you are not the end user,
please make sure the aftercare instructions are made available for the end user to
read.
Hinge components
Stainless steel cover cap
Screw
Adjustment plate
Pin
Hinge anchor
Rubber washer
Fixing bolt
Quick release
Hinge socket
button
1.
Fixing the hinge anchor:
Insert the Adjustment plate and Rubber washer into their
positions on the Hinge anchor component.
Place the Screw through the components and into the hole
on the toilet pan.
Screw the fixing bolt onto the Screw from the underside of
the toilet pan.
Use a screwdriver to tighten from the top. NOTE: don't fully
tighten at this stage as some adjustment may be required.
Toilet seat