Table of Contents
Advertisement
ENGLISH
For an international call you can enter the "+" for international prefix.
The "+" character will appear if you long press the [*] key. Alternatively,
you can also enter the "00" for the international prefix.
Note: you can make an emergency call "112" even if no SIM card is
inserted or no subscribed network is available.
3.5 Making a second call
You can make a second call while you have one active connection on
phone. To make a second call:
Enter the number directly while your call is still active and press "Call"
•
left soft key. The active call will be automatically put on hold.
Or you can press the "Options" left soft key and select "New Call"
•
Enter new number or access the phone book to locate the number you
want to dial, and then press the "Call" key.
If the call is successfully connected, you should see two calls on the
•
list, one is on hold and one you just dialed is active.
After the call, press "End" soft key or the [CLEAR] key to hang up
•
The phone will automatically un-hold the held call.
Note: After you have made your second call, you can swap the calls or connect
your active call to the held call to make it a conference call, which act as one
group, you will be able to make another call with the spare connection allowance.
For a call with one active connection and one hold connection, it is allowed
to transfer one of the calls to another terminal. This is the explicit call transfer
feature which is network dependent.
3.6 Receive a call
When receiving an incoming call, the phone rings and incoming call
notification appears on the screen. If the caller can be identified
caller's phone number or the correspondent name (if the number has
been stored in your phonebook) is displayed.
You can answer the call without pick up the handset and press the
•
"Answer" soft key or to reject the call, by press the "Reject" soft key.
Answered call will be in speaker mode.
Alternatively, pick up the handset will answer the call.
•
You can adjust the receiver volume during conversation by pressing
•
the volume keys. Receivervolume will be increased by pressing the
[VOL+] key and will be decreased by pressing the [VOL-] key. Volume
levels are 1-7.
End the call after conversation by pressing the [CLEAR] key or select
•
"End Call" from "Options" left soft key.
6
You can choose to end a call or end all calls
7
Caller ID display will depend on the subscribed services or network settings
P.8
3.7 During a call
When you have an active call connection, "Options" appears on the left
soft key, press the key to use the ongoing call menu.
New Call:
•
8
Hold
:
•
Unhold:
•
Mute:
•
Un-mute:
•
Phonebook: Consult the phone book menu
•
Messages: Send or read a message
•
End call:
•
3.8 Answer a second call
Your can answer a second call during conversation if you have subscribed
the "Call Waiting" feature from your local network operator. When the
6
.
third party call phones in, you will hear a periodic 'do' or beep sound
and the screen will show phone number of the caller if caller ID feature
is enabled. You can choose either to answer or reject the third call. If
the third call is answered, the current active call will be held.
3.9 Multiple calls
You can set up a conference call if you have more than one calling party
on line. If you have one active call and one held call you can:
Swap between the held call and the active call.
•
Connect the held call and active call to make a multiparty
•
conference call.
7
, the
Private call: Separate an individual from the main conference call.
•
End a call or end all the calls
•
Once you set up a conference call, the connected parties become
connected as one group and you can still make a new call or receive
an incoming call. By doing this, all parties in the conference will be held.
You can also add the third call into the conference.
Depending on the network service, you can add up to 6 parties into a
conference call. Please note the charging scheme may be different if
you make multiple calls.
8
When you are making a call, "Hold" or " Unhold" appears on the right soft key
9
This depends on the network settings
Make a new call by enter new number or via phonebook
entries
Put an active call on hold
This option will put a held call back to active
Temporarily mute the microphone. The caller cannot
hear you
This option deactivates the mute function
To end the call
P.9
ENGLISH
9
Advertisement
Table of Contents
