Maintenance Schedule - NTC RZ 122 Operation Manual

Asphalt and concrete cutters

6. MAINTENANCE SCHEDULE

This maintenance schedule contains only the most important operations. Besides of these operations, carry out maintenance and repairs of the machine
as necessary depending on the respective conditions of operation. Check also the engine operation manual.
WARNING:
Turn off the engine before any maintenance or repair activity.
Use genuine spare parts only. Use of non-original spare parts may lead to damage to the machine. The manufacturer will not honor any
warranty claim arising from such reason.
Item Operation
Engine oil Inspection of oil level
Exchange
Air filter Inspection
Cleaning
Spark plug (gasoline Inspection - cleaning
engines)
Filter bowl Cleaning
Fuel hose Inspection - Exchange
Valve clearance Inspection - adjustment
Fuel tank and sieve Cleaning
Drive belt Tensioning
1. To be carried more often when operating in dusty environment!!!
2. Such maintenance should be performed by service technicians NTC, respectively. authorized service according to engine type, especially
if the user does not have the proper tools and knowledge about these devices.
page
Operation manual
Initial inspection After 1st month or 20
hrs.
Every 12 months or 250 hrs. (2)
Every 12 months or 300 hrs. (2)
issued
Every 3 months or 50
hrs.
DAILY
(1)
Every two years
Every 6 months or
100 hrs.