Technical Description - NTC RZ 122 Operation Manual

Asphalt and concrete cutters
6. Decal informing, that the machine can´t be moved over the site
with running cutting blade (when the cutting blade is not in
operation)
7. Decal informing about fuel type
8. Decal BLACK ARROW
(decal marks the rotation direction of the cutting blade)
9. Decal WHITE ARROW
(decal marks the grade of cutting blade setting towards the cut
material on the depth scale)
10. Decal showing the depth scale
11. Decal showing the noise emission value, which was measured
by test according to conditions of NV no. 9/2002 Sb. in the
machine (models – see point 2.1)
The value is only informative, it varies according to machine
model.
1.9. Packing material handling
Company NTC STAVEBNÍ TECHNIKA spol. s r.o. is registered by company EKO-KOM a.s.
Agreement about the repurchase of all kinds of packing materials "Agreement of associated fulfillment"
is concluded with company EKO-KOM a.s., by company NTC STAVEBNÍ TECHNIKA spol. s r.o. or
suppliers of packing materials.

2. TECHNICAL DESCRIPTION

The asphalt and concrete cutters RZ are
intended for cutting of asphalt and concrete
floors or road layers when repairing roads,
industrial areas, etc.
The machine is based on a rigid frame with
fixed spindle; the cutting disc is lowered to the
cut together with the whole frame. Lowering
and rising of the cutting disc is controlled by
means of a arrested handle that enables fine
regulation of cutting depth.
The machine is intended for wet cutting and
therefore it is equipped with a sprinkling
system. Water for sprinkling can be brought
page 10
either from machines-mounted water tank of
from external source.
The machines can be used also for dry cutting,
assuming a suitable cutting disc is used. This
method however causes high generation of dust
and thus breathing protection would be required.
The machine is driven by a single-cylinder,
four-stroke gasoline engine HONDA.
Travel is manual; the operator pushes the
machines by height-adjustable handle.
Floor saws RZ are equipped with a reference
depth scale.
Operation manual
issued