Advertisement
EURO CHARGER 12 DV,
INSTALLA TION GUIDE & MANUAL
INDICATOR INSTALLATION
1.
Locate indicator in a convenient place on the vehicle
2. Place the template in position and center punch in 4
places
3. Drill holes as shown
4. Cut out square hole
Hole Template may not be to Scale, please check dimensions before using.
Visit: www.evpeurope.com
Call: +44 (0) 1926 419441
E-mail: sales@evpeurope.com
EVP Ltd, Unit 4, Benford Court, Lower Cape, Warwick, CV34 5DA
TM
INDICATOR INSTALLATION
091-165-12-DV
INDICATOR INSTALLATION
8-32 SCREW
8-32 SCREW
INDICATOR
INDICATOR
Hole Template may not be to Scale, please check dimensions before using.
5. Connect wiring to charger in accordance with the
instructions in the charger installation instructions
6. Install as shown
7.
Insert (4) #8-32 screws supplied and tighten.
Caution: do not over tighten because you will bend the
plastic bezel and break the watertight seal
TRUCK WALL
TRUCK WALL
GASKET
GASKET
#8-32 HEX NUT
#8-32 HEX NUT
LOCK & FLAT WASHER
LOCK & FLAT WASHER
File: Ind.cdr rev C: 3-31-10 do not shrink this art work
File: Ind.cdr rev C: 3-31-10 do not shrink this art wor
Company Registration Number: 9121263
VAT number: 196484653
Advertisement
