Table of Contents
Advertisement
AHLINK
SERIAL
Serial number of the unit
VER
Firmware version
CONTROL
Move the HDMI cable up and down
COMMAND
Information of the last AHnet
command received from RS422 port
INFORMATION OF THE SENSOR STATUS
S1: Activate when the HDMI cable is inside
S2: Active when the cable cover trap is
open
S3: Deactivated when the cable is at the
maximum outside position indicates the
screen is completely opened
AHNET ADDRESS
Configuration of the AHnet
address of the unit password
PASSWORD
Password needed to access the
technical configuration page
21
Advertisement
Table of Contents
