ARTHUR HOLM DynamicCableRetract AHDCRHDMI User Manual page 16

MOUNTING INSTRUCTIONS
Mounting the DynamicCableRetract
3- To level the device top surface of the
device with the table, screw the (x4)
M6x60 screws gradually.
There is a M6 screw in every corner, tighten
one more than others you can level the
DynamicCableRetract top surface of the
table or cover plate.
4- Tighten x4 M6 screws to block the device.
Before blocking, The DynamicCableRetract top
surface must be centered in the hole ensuring
that the perimeter has the same separation on all
16