Kodak UC101 Quick Start Manual page 7

above suction base installation by placing the sticky gel suction
base on to the suction plate).
1 - It is advised wireless charging be done in cooler
environments.
In a hot environment, the charging speed will decrease or
charging will stop automatically with overheat protection.
Recommeded charging environment from 5°- 25°
2 - It is normal for the phone to get hotter whilst wireless
charging compared to cable charging.
3 - The phone will not charge normally with a phone case
thicker than 2mm.
4 - Wireless pad must not come into contact with metal,
magnetic or hot objects.
5 - Periodically check the strength of the suction base.
6 - Do not install the holder where it will obstruct the driving
view.
7 - Do not operate phone and holder while driving.
8 - Be careful not to operate charger near implantable medical
devices.
The sticky gel pad can be cleaned with water to maintain
stickiness. After washing, please check the stickiness has
recovered after a short period of time.
MAINTENANCE OF GEL PAD
suction plate
CAUTION
07
C.