Kodak UC101 Quick Start Manual page 6

SUCTION BASE INSTALLATION
1 - Select a location to install the holder and clean the area
where suction base will be placed.
2 - Unlock the suction lever.
3 - Peel out the gel pad protection clear sheet.
Refer to image 6.
4 - Press the suction plate firmly against attaching position
and press the lever to lock.
5 - Check the strength of the suction.
HOW TO USE SUCTION PLATE
The optional use of the included suction plate is for unsmooth
surfaces to be used in conjunction with sticky gel suction base.
1 - Clean area where suction plate is to be placed.
2 - Peel o the protection sheet from the double sided suction
plate and fix to chosen area. (Then follow steps 2-5 of the
Protection Clear Sheet
image 6
Suction Base
Sticky Gel Pad
06