Kodak UC101 Quick Start Manual page 2

HOW TO ATTACH MAGNET PLATE SHEET
Note: The magnet plate sheet must be used correctly to
charge and mount phone stably. Follow the below
instuctions, otherwise wireless charging will not work.
Be sure to a ix the included magnet plate sheet
perfectly to the phone case with the double sided tape,
otherwise it will move and interfere or stop the wireless
charging process.
Do not use any other magnet plates with this wireless
charger.
1 - Find the center of the wireless coil in the phone as shown in
image 1.
Generally most phones, it is located in the center of the
phone.
2 - Place magnet plate sheet into the phone case and mount
onto the holder to check for the correct mounting and
charging position before a ixing double sided tape on to
the phone case.
Center of Coil
Wireless Coil
02
image 1