Table of Contents
Advertisement
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
Select Autoposition item by using " " or " " buttons.
Press OK or " ", " " button.
Warning: Please ensure auto adjustment is performed
with a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Select H Position item by using " " or " " button.
Use " " or " " button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top
or bottom of the screen.
Select V Position item by using " " or " " button.
Use " " or " " button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Select Phase item by using " " or " " buttons. Use
" " or " " button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Select Dot Clock item by using " " or " " buttons.
Use " " or " " button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following: Press
" " or " " button to select the second icon. PC Picture
menu appears on the screen.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical to
settings defi ned in TV picture menu under "Analogue
TV Menu System".
Note: If you set Colour Temp as User, you can defi ne R, G,
B settings manually.
Sound,Feature and Source settings are identical to thesettings
explained in Analog Tv menu system.
Displaying TV Information
Programme Number, Programme Name, Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
"
" button is pressed.
Muting Function
Press "
" button to disable sound. Muting indicator
will be displayed in the upper side of the screen.
To cancel muting, there are two alternatives; the fi rst
one is pressing the "
is increasing the volume level.
PIP (Picture-in-Picture) and
PAP (Picture-and-Picture)
Modes
You can enable or disable PIP/PAP modes by using
the Features menu.
At PIP Mode, a small picture (PIP picture) is displayed
on the main picture. There are 1 size and 4 positions
(upper left, upper right, bottom left and bottom right)
available for the PIP window. Aspect Ratio of the PIP
window is fi xed and 4:3.
When PIP Mode is entered, the default active window
is the PIP window and the active window is indicated
by a yellow frame around it. The active window can
be changed by pressing " " or " " button. The status
info OSD belongs to active window. The place of the
status OSDs are same for both windows.
At PAP Mode, two pictures with equal sizes are
displayed on the screen. Aspect Ratios of the windows
are fi xed.
When you switch to PAP Mode, main window in PIP
Mode will be displayed on the right side of the screen.
The active window can be changed by pressing
" " or " " button.
Freezing Picture
You can freeze the picture on the screen by pressing
the "OK" button on the remote control. Press the
"OK" button to freeze picture. Press again to quit
freeze mode.
Note: This feature will not be available while in DTV mode.
Zoom Modes
You can change the aspect ratio (image size) of the TV
for viewing the picture in different zoom modes.
Press "ZOOM" button to directly change the zoom
mode.
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in 720p-1080i resolutions,
only 16:9 mode is available.
English - 27 -
" button and the second one
Advertisement
Table of Contents
