FeelHEY HEY Bracelet Manual page 17

Test your bracelet
If your device is paired with a HEY bracelet you can tap 'Test your
bracelet' to feel a test touch. Test touches are not logged in your Timeline.
Pair and unpair a HEY Bracelet
You can pair a HEY Bracelet to your device if you have not yet done so:
1. Tap 'Search for HEY' to search for an available HEY bracelet.
Make sure Bluetooth is enabled on your device. See your
device's manual on how to enable Bluetooth;
2. Tap 'Start searching' to search for an available HEY
bracelet. Note that your HEY bracelet can go into sleep
mode when it is unpaired. Place your hand over the top of
your HEY bracelet for a few seconds to wake it;
3. Tap 'Cancel' if you want to stop searching for an
available HEY bracelet. Note that you can tap outside the
pop-up window to go back to the Bracelet menu;
4. Once one or more HEY bracelets have been found they will
be listed in the app;
5. Tap 'Pair' to pair with a HEY bracelet. You can tap 'cancel'
if you want to stop pairing.
6. Once your HEY bracelet is successfully paired you can
tap 'Test your bracelet' to feel a test touch.
You can unpair a HEY bracelet if you are already paired with one:
1. Tap 'Unpair'
2. Tap 'Unpair' to unpair your HEY bracelet from your device. Tap
'Cancel' to stop unpairing.
Settings
Under Settings you can toggle two settings on or off:
FeelHey Hey Bracelet Manual 04-2020